Jaw crushers process medium to hard quarry rock or other materials by compressing it between the fixed jaw and the swing jaw. The swing jaw being the moving part is attached to a rotating eccentric shaft. The fixed jaw is an integral part of the crusher frame. Both jaws are fitted with manganese jaw liners that can be replaced or reversed when worn. During the crushing operation, the toggle plate which acts as a pivot point for the jawstock, controls movement of the lower part of the swing jaw.

 

Osborn Hadfields Jaw Crusher (Single Toggle)

The single toggle crusher is designed for a high capacity throughput due to the elliptical movement of the swing jaw which also assists in the discharge of the crushed material. As the single toggle crusher will achieve far higher capacities than the double toggle design, they are often used as a primary crusher.

Features:

Production capacity up to 1,600 t/h
Rock compressive strength up to 400 MPa
Excellent nip angle
Fabricated main frame and swing jaw
Reversible jaw dies for maximum wear
Relief / adjustment

Osborn Hadfields Jaw Crusher - single toggle

 

Osborn Hadfields Jaw Crusher (Double Toggle)

For much harder and highly abrasive materials with a compressive strength of up to 600 Mpa, the double toggle crusher would be the preferred machine.

The double toggle is capable of handling extremely hard rock and Ferro materials, but rate of feed and reduction ratio’s are restricted. With the top of the hinged swing jaw almost perpendicular to the crushing chamber, high compression is achieved by the linear stroke of the toggle movement thus minimising wear on the jaw liners.

Features:

Production capacity up to 600 t/h
Rock compressive strength up to 600 MPa
Excellent nip angle
Fabricated main frame and swing jaw
Reversible jaw dies for maximum wear

Osborn Hadfileds Jaw Crusher - doubgle toggle

 

Osborn Telsmith Jaw Crusher (SA)

Features:

Production capacity up to 1,000 t/h
Rock compressive strength up to 500 MPa
Patented hydraulic beam locking system
Excellent nip angle
Fabricated main frame and swing jaw
Reversible jaw dies for maximum wear
Relief / adjustment

Osborn Telsmith Jaw Crusher

 

Location

Visitor Counter

0139898
Today
This Week
This Month
All days
81
615
1688
139898

Forecast Today
240


Your IP:54.221.75.68
Go to top